20 Litre Bubble Top Blow Moulding Machine

Mould Clamping

  • Hydraulic mould clamping system to enhance power efficiency. It saves air consumption and hence reduces production cost.
  • Unique mechanical lock with mould compensation system.

Heating

  • Auto-controlled air ventilation in heating chamber for better heat penetration and to minimise ΔT in heating chamber.

Safety

  • Two hand operations (till mould close function is complete) to prevent accidents.
  • ELCB in main supply for protection against electric shock.
  • Individual MCBs for all heaters.
Description Unit 20 litre - SP-25000 H
Machine Specifications
No. of Cavity No 1
Mould Clamp   Hydraulic
Stretching Type   Pneumatic
Production Per Hour BPH 60
Nominal Bottle Volume ml 20000
Max Bottle Dia mm 350
Max Neck Dia mm 120
Max Bottle Height mm 500
Air Requirement
H.P. Air CFM CFM 20
Calculated at   (20000 ml @ 30 Bar)
L.P. Air CFM @ 8 bar (without Air Recovery) CFM 5
L.P. Air (CFM after Air Recovery) CFM  
Electrical Requirement
Connected Load Without Utility kW 22
Nominal Power Consumption kW  
Cooling Tower
Cooling Tower (for Blowing Machine) TR Not required
Water Circulating Pump With DOL Starter (for Blowing Machine) kW Not required
Cooling Tower (for Compressor) (20 TR @ 100 CFM) TR 10
Water Circulating Pump With DOL Starter (for Compressor) (3 HP @ 100 CFM) kW 1.5
Cooling Tower Total Capacity   10
Mould & Neck Cooling
Chiller-1 TR 3
Chiller-2 TR  
Designed by Webinfinium